-
CJX2N65 Ecnomic type ac contactor LC1N
CJX2N65 is a level 3 AC contactor commonly used in AC-3 and AC-1 scenarios. The product complies with the requirements of standards EN/IEC60947-1, GB14048.4 and EN/IEC60947-4-1, with a rated working voltage of 690V, a rated current of 12A, and overvoltage category III. Pollution level 3, control loop agreed heating current 10A@≤60 ° C, insulation resistance > 10 megohms, coil voltage 220V@50Hz, have 1 normally open contact, electrical life 3600 times/hour, maximum operating frequency 1800 times @≤60 ° C, product can be optionally clamp-mounted or screec-fixed to mounting plate The product has passed CCC certification and complies with RoHS and Reach.
-
CJX2N95 magnetic ac contactor LC1N
CJX2N95 is a level 3 AC contactor commonly used in AC-3 and AC-1 scenarios. The product complies with the requirements of standards EN/IEC60947-1, GB14048.4 and EN/IEC60947-4-1, with a rated working voltage of 690V, a rated current of 12A, and overvoltage category III. Pollution level 3, control loop agreed heating current 10A@≤60 ° C, insulation resistance > 10 megohms, coil voltage 220V@50Hz, have 1 normally open contact, electrical life 3600 times/hour, maximum operating frequency 1800 times @≤60 ° C, product can be optionally clamp-mounted or screec-fixed to mounting plate The product has passed CCC certification and complies with RoHS and Reach.
-
CJX2D09 new type ac contactor LC1D
CJX2D contactor LC1D, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). They can be used to create motor starters for almost any type of application. It provides a 120V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
-
CJX2D25 new type magnetic contactor LC1D
CJX2D25 contactor LC1D, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). They can be used to create motor starters for almost any type of application. It provides a 120V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
-
CJX2D40 new material ac contactor LC1D
CJX2D40 contactor LC1D, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). They can be used to create motor starters for almost any type of application. It provides a 120V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
-
CJX2D65A slim type magnetic ac contactor LC1D
CJX2D65A contactor LC1D, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). They can be used to create motor starters for almost any type of application. It provides a 120V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
-
CJX2D95 new type magnetic ac contactor LC1D
CJX2D95 contactor LC1D, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). They can be used to create motor starters for almost any type of application. It provides a 120V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
-
MXS Series aluminum alloy double acting slider type pneumatic standard air cylinder
The MXS series aluminum alloy double acting slider pneumatic standard cylinder is a commonly used pneumatic actuator. The cylinder is made of aluminum alloy material, which is lightweight and corrosion-resistant. It adopts a slider style design, which can achieve bidirectional action, providing higher work efficiency and accuracy.
The MXS series cylinders are suitable for various industrial fields, such as automated production lines, mechanical equipment, automotive manufacturing, etc. It can be used for various functions such as pushing, pulling, and clamping, and is widely used in industrial automation control systems.
The MXS series cylinders have reliable performance and stable operation. It adopts advanced sealing technology to ensure the sealing performance of the cylinder under high pressure. At the same time, the cylinder also has a long service life and low noise characteristics, which can meet the needs of different working environments.
-
SC Series aluminum alloy acting standard pneumatic air cylinder with port
SC series pneumatic cylinder is a common pneumatic actuator, which is widely used in various industrial automation systems. The cylinder is made of aluminum alloy, which is light and durable. It can realize two-way or one-way movement through air pressure, so as to push the mechanical device to complete specific tasks.
This cylinder has Pt (pipe thread) or NPT (pipe thread) interface, which is convenient to connect with various pneumatic systems. Its design conforms to international standards, ensuring compatibility with other pneumatic components, making installation and maintenance easier.
-
SCG1 Series light duty type pneumatic standard air cylinder
Scg1 series light pneumatic standard cylinder is a common pneumatic component. It is made of high-quality materials with reliable performance and durability. This series of cylinders are suitable for light load and medium load applications, and can be widely used in the field of industrial automation.
Scg1 series cylinders have compact design and light weight, which are suitable for installation in places with limited space. It adopts the standard cylinder structure and has two types of options, one-way action and two-way action. The diameter and stroke size of the cylinder are diversified to meet the needs of different applications.
The seals of this series of cylinders are made of wear-resistant materials, ensuring the sealing performance and service life of the cylinders. After special treatment, the piston rod of the cylinder has good corrosion resistance and wear resistance, and can be used in harsh working environment.
-
SCK1 Series clamping type pneumatic standard air cylinder
The SCK1 series clamping pneumatic standard cylinder is a common pneumatic actuator. It has reliable clamping ability and stable working performance, and is widely used in the field of industrial automation.
The SCK1 series cylinder adopts a clamping design, which can achieve clamping and release actions through compressed air. It has a compact structure and lightweight weight, suitable for applications with limited space.
-
SDA Series aluminum alloy acting thin type pneumatic standard compact air cylinder
SDA series aluminum alloy double/single acting thin cylinder is a standard compact cylinder, which is widely used in various automation systems. The cylinder is made of high-quality aluminum alloy material, which is light and durable.
SDA series cylinders can be divided into two types: double acting and single acting. The double acting cylinder has two front and rear air chambers, which can work in both positive and negative directions. The single acting cylinder has only one air chamber and is usually equipped with a spring return device, which can only work in one direction.