WT-HT 5WAY Surface Distribution Box
WT-HT 5WAY Surface Distribution Box.
waterproof box
IP-rated waterproof enclosures for outdoor solar and electrical installations.
waterproof box products
WT-HT 12WAY Surface Distribution Box
WT-HT 12WAY Surface Distribution Box.
WT-HT 18WAY Surface Distribution Box
WT-HT 18WAY Surface Distribution Box.
Need the Enclosure with the Breakers?
Send the circuit list and the number of spare ways. We reply within 24 hours with the box size, the rail arrangement and the packing plan for the whole board.
DISTRIBUTION BOXES
Surface Distribution Boxes in 5, 12 and 18 Way
A distribution box is the enclosure that turns a pile of breakers into a board. It provides the DIN rail, the cover, the cable entry and the fixing points, and its size decides how many circuits the board can hold.
WT-HT comes in 5-way, 12-way and 18-way versions, surface mounted, for wall fixing in plant rooms, workshops, shops and houses. Modules clip onto the standard 35 mm rail inside.
The number of ways is counted in modules, not circuits: a two-pole breaker takes two ways and a four-pole takes four, so a 12-way box holds six two-pole breakers with nothing left over. Units carry CE and CCC marking.
Choosing a Box Size
Count modules, add spares, then choose the enclosure. A board that is full on day one cannot be extended without replacing the box.| Model | Ways | Holds roughly | Use |
|---|---|---|---|
| WT-HT 5 WAY | 5 | 2 single-pole + 1 two-pole + main | Single room, small shop |
| WT-HT 12 WAY | 12 | 5 two-pole + main + spare | Apartment, small office |
| WT-HT 18 WAY | 18 | 8 two-pole + main + spares | Workshop, plant room |
Before you order
- Count modules, not circuits. A two-pole breaker is two ways, a four-pole is four.
- Leave spares. Two ways minimum, more if the building may be extended.
- Decide surface or flush before the wall is finished; changing afterwards means cutting plaster.
COMMON QUESTIONS
Frequently Asked Questions
Count the modules: a two-pole breaker takes two ways and a four-pole takes four. Then add at least two spare ways so the board can be extended without a new enclosure.
A surface box fixes on the wall and stands proud of it. A flush box sits inside a recess cut into the wall. Surface is faster on retrofit work; flush looks better in finished rooms.
The WT-HT range is a surface box for wall mounting inside a building or a sheltered plant room. If the location is exposed, tell us the protection level the installation requires and we will confirm whether this enclosure fits.
Yes, the enclosure is built around a standard 35 mm rail and comes with its cover. Breakers and contactors are ordered separately.
CONTACT US
Start Your Electrical Project Today
Send your application, voltage, certifications and quantity to this electrical protection manufacturer. We reply with a quotation within 24 hours.
- Engineering review by an electrical protection manufacturer before quoting
- Plant pricing with no intermediaries
- Export packing and shipping handled in one place
- One order owner from quotation to delivery